Kenwood TM-D710GA - Manual (Page 38)

GPS – 5
■ Mark Waypoint List
The information registered with the Mark Waypoint is
confi rmed.
1 Press [MARK] to display the Mark Waypoint list.
• The list of Mark waypoints appears.
2 Rotate the Tuning control to select a Mark Waypoint.
[TOP]: Displays the fi rst 5 Mark Waypoints.
[5

]: Displays the previous 5 Mark Waypoints.
[5 ]: Displays the next 5 Mark Waypoints.
[COPY]: Displays the Target Point list.
[CLR]: Deletes the current Mark Waypoint.
[ESC]: Returns to the frequency display.
3 Press the Tuning control to display the details of the
selected Mark Waypoint.
■ Copying a Mark Waypoint to a Target Point
You can copy the displayed Mark Waypoint to a Target Point.
1 Rotate the Tuning control to select a Mark Waypoint.
2 Press [COPY] to display the Target Point list.
3 Select the Target Point (1 ~ 5) that you want to copy.
■ Deletes all Mark Waypoints
1 Press [MARK] to display the Mark Waypoint list.
• The list of Mark waypoints appears.
2 Rotate the Tuning control to select a Mark Waypoint.
3 Press [F].
4 Press [ALLCLR].
• “CLEAR ALL?” appears.
5 Press the Tuning Control to clear all Mark Waypoints.
■ Detailed Display of a Mark Waypoint
a: Latitude, longitude b: Altitude c: Grid square locator
• Rotate the Tuning control to change to the previous/next detailed
display.
[BACK]: Returns to the Mark Waypoint list display.
[EDIT]: Enters Mark Waypoint Edit mode.
[COPY]: Displays the Target Point list.
[CLR]: Deletes the Mark Waypoint currently being displayed.
• Press [F].
• Press [N/H] to change the Heading Up and North Up display.