Kenwood RC-D710 - Manual (Page 58)

APRS-18
■ UIFLOOD
When using the RC-D710 as a digipeater, set whether
or not UIFLOOD digipeat runs.
When the received UI Frame character string matches
the entered alias (for example, CA), the number of
hops (for example, 2-2) is processed and decreased by
1 (for example, CA2-2 becomes CA2-1).
Enter Menu mode and access Menu 619.
1 Set UIFLOOD to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UIFLOOD alias.
• When running UIFLOOD digipeat, set the character
string of the alias that is used.
4 Press the Tuning control.
• You enter UIFLOOD SUBSTITUTION Setting mode.
5 Set one of [ID], [NOID], or [FIRST].
[ID]: Your station callsign is embedded. When there is
already a callsign in the relayed UI frame, your station
callsign will replace the existing callsign.
[NOID]: The callsign is not embedded or replaced.
[FIRST]: When there is no callsign in the relayed UI
frame, your station callsign is embedded. When there is
already a callsign in the relayed UI frame, the callsign is
not embedded or replaced.
■ UITRACE
When using the RC-D710 as a digipeater, set whether
or not UITRACE digipeat runs.
When the received UI Frame character string matches
the entered alias (for example, WIDE), the number of
hops (for example, 2-2) is processed and decreased by
1 (for example, WIDE2-2 becomes WIDE2-1), and your
station callsign is added to the UI Frame.
Enter Menu mode and access Menu 620.
1 Set UITRACE to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UITRACE alias.
• When running UITRACE digipeat, set the character
string of the alias that is used.
STORING USER PHRASES
Enter Menu mode and access Menu 621.
This function (clipboard image) allows you to paste
phrases into the APRS message compilation mode. You
can create up to 4 phrases each of which can consist of
up to 32 characters.
• The user phrase function can only be used in the message
compilation mode.
• Before a message is copied, the number of letters cannot
be guaranteed. Only the number of letters available will be
copied, the remainder will be truncated.
• To copy a message, enter message compilation mode, press
[F] to enter function mode, then press [PASTE1], [PASTE2],
[PASTE3], or [PASTE4] to copy the message that has been
set up for each key.
• If the user messages [PASTE1], [PASTE2], [PASTE3], and
[PASTE4], are not set up, they cannot be used.