Kenwood NX-420 User Manual

Page 37

CONTrOl CHANNEl HUNT

On digital Trunking channels, the transceiver automatically

searches for a control channel.

• While searching for a control channel, the antenna icon will flash

(types I and II only) and no signals can be received.

PTT ID

PTT ID is the transceiver unique ID code which is sent each

time the

PTT switch is pressed and/or released.

Note: PTT ID can be made only in analog operation.

vOICE ANNUNCIATION

When changing the zone, channel, and/or group, an audio

voice will announce the new zone, channel and group number.

TrANSMIT POwEr

Each channel is programmed with either high or low transmit

power. On high transmit power channels, press the key

programmed as

[Low Transmit Power] to change the transmit

power to low power (you cannot change low transmit power

channels to use high power).

• The indicator appears while using low transmit power (types I and

II only).