Kestrel 4000 - Manual (Page 9)

9
• Press to select the highlighted language.
RESTORE
This menu contains options for global settings of
all units to metric or imperial, and returning the
reference values for the Alt and Baro screens to
default (0 ft, 29.92 inHg).
To change units:
• Press
or to scroll to the desired setting
and press or .
To return the reference values for the Baro and Alt
screens to default:
• Scroll to Defaults and press or .
The global units setting option is found on the “Units” sub
menu on the Kestrel 4500 with HORUS Ballistics.
mEmORY OPTIONS
• Press or to scroll to one of these options:
Clear Log Go Press or to clear stored data
(will also clear Min/Max/Avg
log).
Reset MMA Go Press or to clear Min/Max/
Avg data
(Chart data will remain intact).
Auto Store On Press or to turn “On” (data
will automatically store at Store
Rate) or “Off” (data will only store
when manually captured with
the button).
Store Rate* 1hr Press or to increase or
decrease frequency at which
data is stored (from 2 sec - 12 hr).
Overwrite On Press or to turn “On” (will
discard oldest data point to
capture new data when log is
full) or “Off” (will not capture new
data when log is full).
Man Store On Press or to turn “On” or “Off”
(Off will disable button).
* When unit is off, data will continue to be stored unless the
2 sec or 5 sec Store Rates have been selected.
Data storage
To manually store data, press the button. The
screen will confirm data storage status.
• Data stored: verifies that data was captured and
will appear on chart.
• Full: indicates overwrite is off and data log is full.
• Off: indicates that the Manual Store button has
been disabled.
See Main Setup Menu for more information on memory.