Kestrel 4000 - Manual (Page 14)

14
pair Your Kestrel with Your Computer
First, make sure your Kestrel unit’s Bluetooth is set
to ON. Open the Bluetooth management software
on your computer and follow the prompts to enter
the PIN. A COM Port will be assigned and displayed
in the software once connection to the Kestrel is
established.*
This is a general guideline for pairing your Kestrel with
your computer. Individual Bluetooth software programs
and navigation may vary, and some computers do not
come equipped with Bluetooth capability and will need
additional products to communicate via Bluetooth.
* A “Bluetooth Error” screen will appear on the Kestrel if
pairing is unsuccessful.
set up Kestrel Communicator software
• Go to: http://www.nkhome.com/support/
pdfs.html.
• Scroll down to software under Kestrel.
• Download and install the Kestrel Communicator
Software from this link.
• Once installed, the “Kestrel Communicator”
icon will appear on your desktop. Click on
the icon and use the “Help” tab to find full
instructions for use.
BLuEtOOtH® sEtup