Kestrel 4000 - Manual (Page 8)

8
mAIN SETUP mENU
• When unit is on, press to access the Main Setup
Menu, which is used to customize preferences.
• Press and to scroll through the options.
• Press to select the highlighted option.
dATE ANd TImE SETUP
• After battery installation, the meter will
automatically enter the Date and Time Setting
mode.
• Press and to scroll to each option.
• Press and to adjust each option.
• Press the button to exit to the Main Setup Menu.
SYSTEm
Contrast, auto shutdown, batteries and calibrations
can be reconfigured as needed in the System
screen.
• Use
or to highlight one of the following
options:
Contrast
• Press or to increase or decrease the display
contrast from 0 (lightest) to 20 (darkest).
auto shutdown
• Press or to set the time at which the display will
automatically shut off after non-use (choose 15
min, 60 min, or Off to de-activate auto shutdown).
Battery life will be shortened if the Auto Shutdown is
turned to “Off.”
Batteries
• Press or to select the appropriate battery
type in use (choose Lithium, NiMH or Alkaline).
Baro Cal
Recalibration of this sensor is not recommended without
speaking to an NK technician. See “Barometric Pressure
& Altitude Setup” section on page 12 for calibration
instructions.
Humidity Cal
Recalibration of this sensor is not recommended without
speaking to an NK technician. Full humidity calibration
instructions are provided with the Kestrel RH Calibration
Kits. The unit may also be returned to NK for calibration. Visit
www.nkhome.com for more information.
dATE & TImE
• Press to enter the Main Setup Menu.
• Use or to highlight Date & Time.
• Press to enter the Date & Time Screen.
• Press or to change each value.
LANGUAGE
Display text can be set to 1 of 5 languages: English,
French, German, Italian, and Spanish.
• Press
or to scroll the desired language.
sEtup anD OptIOns