32pdxxx installation continued, Important, Fig. 4 – AquaStar 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and Three-Port Manufactured Sump for Vinyl/Fiberglass User Manual

Page 11: Fig. 5, Fig. 6

info

aquastarpoolproducts.com www.aquastarpoolproducts.com

IMPORTANT

• Model: 32PDxxx

• Single or multiple drain use

• At IAPMO (a nationally recognized

testing lab), the Propeller™ Drain 3/4”
sump and cover was tested with no
additional sump depth

• All AquaStar channel drains are

VGB 2008 compliant

• Plumbing to one or two pumps plus

skimmer equalizer are approved –
DO NOT exceed maximum flow rate
of outlet cover for total system

• One-pipe connection must be a

minimum 2” pipe size and centered
along channel slot in sump

• Any plumbing configuration is

approved but do not exceed
maximum flow rate

• IMPORTANT: To be considered

unblockable, the Propeller™ drain
sump must be permanently and
securely affixed to become an
integral part of the pool floor using
epoxy (ie. Aquabond UW 5000)
around the entire edge and all of the
enclosed plastic anchors or optional
brass anchors.

32PDxxx INSTALLATION CONTINUED

The sump must be permanently and securely affixed to the pool floor using epoxy (ie. Aquabond UW
5000) under the sump and around the entire edge and all of the enclosed plastic anchors or optional

brass anchors. Once this is completed, the sump becomes a permanent part of the pool structure,

creating an unblockable drain. The drain cover is then affixed to the sump using the designated screws.

fig. 4

PLASTER

32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS

STEP 4

GRAVEL

SHOTCRETE/GUNITE

TWO-PART
EPOXY

UNBLOCKABLE SUMP

AFFIX THE UNBLOCKABLE SUMP TO THE POOL FLOOR

USING THE INCLUDED #10 X 1" SCREWS

fig. 5

PLASTER

32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS

STEP 5

GRAVEL

SHOTCRETE/GUNITE

TWO-PART
EPOXY

UNBLOCKABLE SUMP

SEAL PERIMETER WITH

EPOXY OR SILICONE

fig. 6

PLASTER

32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS

STEP 6

GRAVEL

SHOTCRETE/GUNITE

TWO-PART
EPOXY

UNBLOCKABLE SUMP

AFFIX THE PINHOLE ANTI-ENTRAPMENT SUCTION

OUTLET COVER TO THE UNBLOCKABLE SUMP USING

THE INCLUDED #10 X 3/4" SCREWS

EPOXY OR SILICONE

This manual is related to the following products:

32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover with Mud Frame 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and Three-Port Manufactured Sump 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and Propeller Manufactured Sump 32" Channel Drain Debris Catcher Suction Outlet with Three-Port Manufactured Sump for Vinyl/Fiberglass 32" Channel Drain Debris Catcher Suction Outlet with Frame 32" Channel Drain Debris Catcher Suction Outlet with Three-Port Manufactured Sump 32" Channel Drain Flat Grate Suction Outlet Cover and Three-Port Manufactured Sump for Vinyl/Fiberglass 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and Three-Port Manufactured Sump 32" Channel Drain Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain Anti-Entrapment Suction Outlet Cover and Three-Port Manufactured Sump for Vinyl/Fiberglass