Dake Model HV 200 - Hydraulic - Manual (Page 7)

Dake Tube Bender manual 08212009 7
Now just hook up your airline (DO NOT EXCEDE 100 PSI) and put in a piece of material and your ready
to start bending.
Remember!!!
Never use a piece of material shorter than the follower bar!!!
Make sure the pins are fully engaged!!!
Never stand in front of or behind the work area or work piece!!!
Do not use more than 100 psi !!!
Never remove the hydraulic line with pressure in the line!!!
Maintenance
Oil the rollers mounted on the bottom of the frame every once in a while.
If for any reason you need to add oil you can on the bottom of the air pump.
WARNING!!!
NEVER REFILL OIL WITH AIR PRESSURE OR HYDRAULIC PRESSURE IN THE
LINES.
Troubleshooting
If the piston sticks down make sure the hydraulic line is installed correctly, it may not be
tightened down correctly.
If for any reason you have questions or concerns please call Dake at 1-800-937-3253 or
at www.dakecorp.com