Dake Model HV 200 - Hydraulic - Manual (Page 4)

Dake Tube Bender manual 08212009 4
Removing your Dake Tube Bender from the packaging
When you receive your tube bender you will receive three boxes. One will have the following components
in the box.
If you have ordered a power unit, in another box you will have either the manual or the air operated pump
Manual Pump Air operated pump
And in the third box you will have the follower bar, the die, the hook, and the hook pin.
There are different dies available they are listed below.
Only one set is included with the tube bender. Others are optional
items.
1.5”
1.666”
1.750”
There are different sizes of follower bars. When using the die be sure
the follower bar and die match to make sure you have the correct
bend. These come in sets of two, one die and one follower bar. They
are scribed with the size on the side of the die and the follower bar.
Frame
Die pin
Follower plate
Two nuts
Two bolts
Foot