beautypg.com

Dake Model SE 912 User Manual

Page 4

background image

- 4 -

WARNING: FAILURE TO FOLLOW THESE RULES

MAY RESULT IN SERIOUS PERSONAL INJURY


As with all machinery there are certain hazards involved with operation and use of the machine.
Using the machine with respect and caution will considerably lessen the possibility of personal
injury. However, if normal safety precautions are overlooked or ignored, personal injury to the
operator may result.
This machine was designed for certain applications only. We strongly recommend that this machine
NOT be modified and/or used for any application other than for which it was designed. If you have
any questions relative to its application DO NOT use the machine until you contact with us and we
have advised you.

Your machine might not come with a power socket or plug. Before using this machine, please
Do ask your local dealer to install the socket or plug on the power cable end.

SAFETY RULES FOR ALL TOOLS


A. USER:

(1).

WEAR PROPER APPAREL. No loose clothing, gloves, rings, bracelets, or other jewelry to

get caught in moving parts.
Non-slip foot wear is recommended. Wear protective hair covering to contain long hair.
(2).

ALWAYS WEAR EYE PROTECTION. Refer to ANSLZ87.1 standard for appropriate

recommendations.
Also use face or dust mask if cutting operation is dusty.
(3).

DON'T OVERREACH. Keep proper footing and balance at all times.

(4).

NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting

tool is accidentally contacted.
(5).

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave

tool until it comes to a complete stop.
(6).

DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of

drug, alcohol or any medication.
(7).

MAKE SURE TOOL IS DISCONNECTED FROM POWER SUPPLY. While motor is

being mounted, connected or reconnected.
(8).

ALWAYS keep hands and fingers away from the blade.

(9).

STOP the machine before removing chips.

(10).

SHUT- OFF power and clean the BAND SAW and work area before leaving the machine.

B. USE OF MACHINE:

(1).

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that