Steffy Wood Products Big Book Display - Manual (Page 3)

LID
1/2" LONG POST
1/2" LONG POST
8-32 x 1/2" FLAT HEAD MACHINE SCREW
DIVIDER
Step 9
Attach the hinges on the lid to the front strip using the brass flathead
screws. Attach the stay arm to the lid using the 1/2" long post and
round head machine screws. Be sure the foot of the stay arm is facing
the center of the cabinet. Attach the remaining end of the stay arm to
the side panel using the post and screw.
Slide the dividers into the slots in the top and bottom panels.
Go back and check all bolts and screws to make sure they are tight!!
STAY ARM WITH SWIVEL
STAY ARM FOOT
CHECK ALL BOLTS AND CONNECTORS
PERIODICALLY TO MAKE SURE THEY ARE TIGHT!
HINGE