Steffy Wood Products Changing Table with Pad and Strap - Manual (Page 2)

2
Insert the plastic connectors into the large holes in the
top strips and divider. Be sure the flat edge of the
connector aligns with the flat edge of the panels.
3
Attach the left side using 6 connecting
bolts and the hex key. Make sure the
connecting screws in the bottom and shelf
are facing each other. Also, be sure the
slots for the back panel are aligned with
the back panel slot in the side panel.
NOTE: The shelf has 2 back panel slots.
4
Slide the back panels into the slots in the top,
shelf, bottom and side. Be sure each back
panel is completely in the slot in the side
panel.
CONNECTOR
TOP STRIPS
DIVIDER
SIDE PANEL
Slots for back panels
Slot in side for
back panels
CONNECTING BOLT
BOTTOM PANEL
SHELF
TOP PANEL
CONNECTING SCREW
BACK PANEL
Slot in side for back panels