Triton Sediment - Manual (Page 11)

Page 8
Click on the 'Add Class' button to
create the class groups. Once a
Class has been created, add samples
by either selecting the correct
feature group in the drop-down list
and selecting Add, or by clicking the
red Record button and manually
double-clicking locations in the map
view to add them to the selected
Class type.
The example to the right shows
three classes defined with samples
added to the Reef class from the
selected feature group.
Options available on this page include:
Add Class - Selecting this will open a dialog for
entering the name of the class types to be
used as shown here:
- Selecting 'OK' will open a 'Color' window to select
the color to use for the entered bottom type as
shown to the right.
- Selecting 'OK' will add the entered name to the
'Training Classes and Samples' field.
Recording Options - The three buttons
shown right are provided for manually
recording or for removing samples from the selected class.
- The left button is for recording. Double-Click in
the Perspective Map View on locations to use as samples for training the Neural
Net. Click on the middle pause button when you are done.
- Selecting the X button will remove the selected points.