Summers 53' Trail-Type Superroller - Manual (Page 12)

SECTION 2 - ASSEMBLY
2-2
GENERAL SAFETY PRACTICES
YOU ARE RESPONSIBLE for the
safe assembly of the machine.
DO NOT ALLOW CHILDREN or
other unauthorized persons within
the assembly area.
WEAR PERSONAL PROTECTIVE
EQUIPMENT which includes a
hard hat, eye protection, work
gloves and steel toed boots with
slip resistant soles.
DO NOT MODIFY the equipment
or substitute parts in any way.
Unauthorized modification may
impair the function and/or safety
of the machine.
U S E S U I TA B L E L I F T I N G
DEVICE for components which
could cause personal injury.
BLOCK UP ANY RAISED PART of
the machine. Be sure machine is
stable after blocking.
ALWAYS INSPECT LIFTING
CHAINS AND SLINGS for damage
or wear.
BE SURE LIFTING DEVICE
IS RATED TO HANDLE THE
WEIGHT.*
STOP ENGINE, place all controls
in neutral, set parking brake,
remove ignition key and wait for
all moving parts to stop before
servicing or adjusting.
ALWAYS make sure Land Roller
is lowered into field position
(cylinders retracted), it is blocked
to prevent movement and that
pressure is relieved from hydraulic
circuits before servicing.
USE EXTREME CARE when
assembling, servicing or adjusting.