Disassembly instructions – Aiwa HV-FX5100 User Manual
Page 7
DISASSEMBLY INSTRUCTIONS
2-11: S REEL/T REEL ASS'Y (Refer to Fig. 2-11)
Remove the Idler Ass'y.
Remove the S Reel and T Reel Ass'y.
Remove the 2 Polyslider Washers
1
.
1.
2.
3.
NOTE
Take care not to damage the gears of the S Reel, T
Reel Ass'y and Idler Ass'y.
The Polyslider Washer may be remained on the back of
the reel.
Take care not to damage the shaft.
Do not touch the section "A" of S Reel and T Reel Ass'y.
(Use gloves.) (Refer to Fig. 2-11) Do not adhere the
stains on it.
When you install the reel, clean the shaft and oil it
(KYODO OIL Slidas #150). (If you do not oil, noise may
be heard in FF/REW mode.)
After installing the reel, adjust the height of the reel.
(Refer to MECHANICAL ADJUSTMENT)
1.
2.
3.
4.
5.
6.
NOTE
Do not touch the Pinch Roller. (Use gloves.)
When you install the Pinch Roller Ass'y, install as
shown in the circle. (Refer to Fig. 2-12-B)
1.
2.
Fig. 2-12-B
2-13: A/C HEAD (Refer to Fig. 2-13-A)
Remove the screw
1
.
Remove the A/C Head Base.
Remove the 3 screws
2
.
Remove the A/C Head and A/C Head Spring.
1.
2.
3.
4.
NOTE
Do not touch the A/C Head. (Use gloves.)
When you install the A/C Head Spring, install as shown
in Fig. 2-13-B. (Refer to Fig. 2-13-B)
When you install the A/C Head, tighten the screw (1)
first, then tighten the screw (2), finally tighten the screw
(3).
1.
2.
3.
A/C Head
2
2
A/C Head Spring
1
Spring Position
(3)
(1)
2
(2)
A/C Head Base
Fig. 2-13-A
Fig. 2-13-B
2-14: FE HEAD (RECORDER ONLY) (Refer to Fig. 2-14)
Remove the screw
1
.
Remove the FE Head.
1.
2.
1
FE Head
• The FE Head is not installed on the Video Cassette Player.
Fig. 2-14
Idler Ass'y
S Reel
T Reel Ass'y
1
1
(A)
(A)
Fig. 2-11
2-12: PINCH ROLLER ASS'Y/P5 ARM ASS'Y
(Refer to Fig. 2-12-A)
Remove the P5 Spring.
Remove the screw
1
.
Unlock the 2 supports
2
and remove the Cassette
Opener.
Remove the Pinch Roller Ass'y, Pinch Roller Lever and
P5 Arm Ass'y.
1.
2.
3.
4.
• Screw Torque: 5
±
0.5kgf•cm
Cassette Opener
2
P5 Arm Ass'y
Pinch Roller Lever
Main Chassis
2
Pinch Roller Ass'y
1
P5 Spring
Fig. 2-12-A
B2-3