Zoo Med Naturalistic Terrarium Repti-Lock - Manual

FIGURE 1 FIGURE 2 FIGURE 3
A
B
C
A
B
C
1. Set combination to 0-0-0: Turn each dial
( C) so that the combination reads 0-0-0
along the centerline beneath the arrow ( B)
as shown in figure 1. Pull up on the shank
( A) to unlock.
2. Set new combination: Rotate the shank
180 degrees and push down as shown in
figure 2. The dials can now be turned to
reset the three digit combination. Record
the new combination in a secure place, or
choose a combination that will be easy to
remember.
3. Lock is ready for use: After setting the new
combination, pull up on the shank and
rotate 180 degrees to the original position
as shown in figure 3. Push down on the
shank and then turn the dials to a random
combination. The lock is now “locked” and
ready for normal use.