High Country Tek MVP-SVR Series - Manual (Page 5)

021-MVP-SVR Rev A MVP-SVR User Manual 5
Copyright © High Country Tek, Inc. – 2013
MVP-SVR
Power Saver Valve Controller
MVP-SVR Controller
The MVP-SVR controller drives proportional solenoid valves with high starting current then reduces it to a lower
operating level. Operating power is reduced thereby saving energy, reducing heat and extending coil life.
Once configured, the settings are permanently stored in the controller memory.
MVP-SVR Features
 Easily configured using HCT Graphical User Interface (GUI) or HCT Hand Held Interface (HHI)
 LED indication of power, output current and fault status
 Permanently sealed, standard DIN 43650 Form A connector body with pre-wired 18AWG PVC cable
 Single coil applications
 Adjustable output with short circuit protection
 Start current and hold current are independently adjustable
 Adjustable start time
Operating Specifications
Supply Voltage 9 to 28VDC
Supply Current Valve current + 20mA (Quiescent Max)
Output Current -06A: 600mA MAX -12A: 1.2A MAX -25A: 2.5A MAX
Coil Resistance 2 Ω MIN.
Operating Temperature Range -20º to 70º C (operating); -40º to 85º C (storage)
Enclosure Glass filled Nylon
Dimensions Inch: 2.4 L x 1.2 W x 0.75 H; Mm: 60 L x 30 W x 19 H