High Country Tek MVP-R Series - Manual (Page 5)

021-MVP-R Rev A MVP-R User Manual 5
Copyright © High Country Tek, Inc. – 2013
MVP-R
Ramping Controller
MVP-R Ramping Controller
The MVP-R controller drives proportional solenoid valves with adjustable ramp times.
Once configured, the settings are permanently stored in the controller memory.
MVP-R Features
 Easily configured using HCT Graphical User Interface (GUI) or HCT Hand Held Interface (HHI)
 LED indication of power, output current and fault status
 Permanently sealed, standard DIN 43650 Form A connector body with pre-wired 18AWG PVC cable
 Single coil applications, programmable enable input
 Output limits are independently adjustable
 Adjustable output with short circuit protection
 Adjustable ramp up and ramp down times (RP1 has ramp up only)
Operating Specifications
Supply Voltage 9 to 28VDC
Supply Current Valve current + 20mA (Quiescent Max)
Output Current -06A: 600mA MAX -12A: 1.2A MAX -25A: 2.5A MAX
Coil Resistance 2Ω MIN.
Dither Frequency 80, 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300.
(Select OFF for 1000Hz)
Ramp Functions -RP1: ramp up only -RP2: ramp up and down
Enable Input Voltage (RP2) 9 to 28VDC
Operating Temperature Range -20º to 70º C (operating); -40º to 85º C (storage)
Enclosure Glass filled Nylon
Dimensions Inch: 2.4 L x 1.2 W x 0.75 H; Mm: 60 L x 30 W x 19 H