High Country Tek Plug Top Driver Series - Manual (Page 3)

Electronic Controller Solutions for the Fluid Power Industry
Plug Top Driver Overview:
Housing Type:- Plug top style using HCT unique ‘encapsulated’ process.
Input Supply Voltage: 12VDC or 24VDC nominal, both ±20% ( Absolute Maximum )
Input Supply Current: Valve Current Setting + ~200mA Quiescent (Max)
Command Input Type(s): Voltage OR Current depending on model used
Command Input Value(s): 0 to +Vref or external 0 - 10VDC max OR 4-20mA depending on model used.
User reference: +12V supply Vref = +8VDC ( ±5%) @ 5mA max
+24V supply Vref = 15VDC ( ±5%) @ 5mA max
Ramp Times (all models) : 300mS to ~8 Secs ( with I max at 100% ) with separate UP and Down settings
Dither Frequency (all models) : Adjustable, ~100 to ~250Hz ( ± 20%)
Housing Material:- High Impact resistance ABS.
Wire Connections:- 3Meters / 10feet pre-connected 4 core, color coded cable to DEF. standard.
Encapsulation:- Flameproof. Black epoxy resin filled
Mounting:- DIN 43650 connector footprint
Temperature range:- -20 to +70 ºC ( operational )
NEMA/IP Rating: NEMA 6P/67 when assembled and mounted to coil correctly
12V and 24V PTD Technical Specifications::
The High Country Tek, range of PTD’s is available in four (4) versions to suit virtually any
application need.
The Voltage command versions can accept 0-10VDC while the Current Command versions
can use the industry standard 4-20mA.
Choose from one of the part numbers below for the correct unit that matches your
requirement:
Part Number -
PTD-12-V - 12V supply, Voltage command, 3000mA O/P current
PTD-24-V - 24V supply, Voltage Command, 1500mA O/P current
PTD-12-C - 12V supply, Current command, 3000mA O/P current
PTD-24-C - 24V supply, Current Command, 1500mA O/P current