High Country Tek Plug Top Driver Series User Manual
Page 12
Electronic Controller Solutions for the Fluid Power Industry
High Country Tek, Inc.
208 Gold Flat Court
Nevada City, CA, 95959
Tel: (1) 530 265 3236
Fax:(1) 530 265 3275
www.highcountrytek.com
PTD-XX-X-C.pub/GG/09
Copyright © High Country Tek, Inc. - 2009
This data sheet may contain mistakes and printing errors. The information in this
publication is regularly checked and corrections made in the next issue. Please
check our website for latest version. HCT accepts NO liability for technical
mistakes or printing errors, or their consequences.
The electronic Plug Top Driver (PTD) unit described here MUST be used and mounted in the manner described in this Information
sheet to fall in line with current regulations on EMC.
By issuing this document, High Country Tek, Inc are showing their commitment and due diligence to the rules concerning EMC from a
global perspective.
A reduced supply voltage will directly effect the valves maximum achievable performance figures regarding flow or pressure.
ALWAYS ensure that the P.T.D. is supplied with the nominal supply voltage as recommended by this literature and the valve coil
manufacturer to get the best results and full control range from the hydraulic product being controlled.
ALWAYS follow connection, application and usage instructions provided with this electronic unit.
ALWAYS ensure that ANY Earth connection is to clean, bare metal and NOT a paint finish.
ALWAYS ensure that NO High Power RF is used near or inside an open enclosure.
ALWAYS mount this unit such that any collected moisture or liquid will be able to escape.
This unit is CE compliant, flame proof but NOT intrinsically safe rated.
Use a Switch Mode Power Supply (SMPS) where possible for the supply voltage on these plug top drivers as they are designed to
work from multiple line voltages/frequencies ( 50 or 60Hz), can supply the high instantaneous current demands created by PWM
control of valve coils and have integrated filters for electrical noise.
Mining & Exploration
Agriculture
Cranes & lifts
Refuse & Re-cycling
Construction
Off-Road vehicles
Forestry, Wood & Pulp
Reclamation & Salvage
Oil Field & Sands
Demolition Equipment
Cooling Solutions
Military Apparatus
Specialty Use
Remote Control
Power Generation
Emission Controls
Integrated Drivers
Valve & Pump Controls