High Country Tek HAD Series User Manual
Had series controllers, Had product manual, Instruction, installation and operation guide for
HAD Product Manual
________________________________________________________________________________
High Country Tek, Inc.
208 Gold Flat Court
Nevada City, CA, 95959.
Tel: (1) 530 265-3236
021-00141 Rev B2.1
1/8
Document Number:
021-00141
Document Revision:
B2.1
Document Issue Date:
Document Creator:
J. Clark
Document Creation Date:
9/10/2009
Instruction, Installation and Operation Guide
for:
HAD Series Controllers
Table of contents
Document Outline
- Description
- Wiring
- Fusing
- Set up procedure:
- All sophisticated electronic systems require attention as to how various components are wired together to insure reliable operation without interference to or from other components. What follows is a brief explanation of issues associated with PWM Va...
- The industry technique most commonly used to control proportional hydraulic valves is called Pulse Width Modulation (PWM). PWM varies the effective voltage across and inductor by applying the full supply voltage to the coil then quickly switching it ...
- The best solution to avoid problems stemming from these current spikes is to first dedicate an isolated, regulated power supply for powering sensitive sensors (Not all sensor manufacturers filter their inputs or outputs). Secondly, it is recommended ...
- Trouble shooting