Packaging, Connectors, Dvc722 product manual – High Country Tek DVC722 User Manual
Page 5
DVC722 Product Manual
High Country Tek, Inc.
208 Gold Flat Court
Nevada City, CA, 95959.
Tel:- (1) 530 265 3236
021-00194_Rev_A-DVC722_User_Guide
5/7
4.
Flashing red – One or more node connections are in a timed-out
state.
5.
On red – The device has detected an error that has rendered it incapable of
communicating on the network.
PACKAGING
A. Physical Size
-
6.2L” x 4.75W” x 1.65H” encapsulated module.
B.
Each module has two mounting holes 4.0” a part. Each mounting hole has an I.D.
of 0.325”.
C.
Weight – 1 lb. 6 oz.
CONNECTORS
A.
The DVC722 uses a Cinch 1.5 mm SHS series (or compatible) sealed electronic
header designed for severe under-hood environments. IP69K
B.
Then CAN Bus connector on the DVC722 is a standard 5-pin M12 type CAN Bus
(DeviceNet compliant) connector.
MATING CONNECTORS
Mating for 30-pin Header (P19) and 18-pin Header (P20)
A.
DVC722 Series 48-pin Connector Kit HCT P/N: 999-10077 Includes the
following:
1 Connector, 30-pin (P19)
1 Connector, 18-pin (P20)
60 Terminals
25 Plugs
B.
Mating for CAN Bus connector (P21)
1.
5-pin Female M12 DeviceNet compliant connector.
C.
Mating to the RS-232 Port – The RS-232 port is accessed through the 18-pin
connector at (P20). A DVC Serial Port Adapter is available to connect to the 18-
pin Female mating connector. A DVC RS-232 Cable can be used to interface
from the DVC Serial Port Adapter to a PC. Drawings for these two cables are
supplied for user assembly; otherwise they are available from HCT.
* Note: The DVC Serial Port Adapter comes with a plug. The plug is used to keep the
cable weather-tight when not connected to peripherals.