Asus M2V - Manual (Page 85)

4-28 Chapter 4: BIOS Setup
CPU Temperature [xxx ºC/xxx ºF]
MB Temperature [xxx ºC/xxx ºF]
The onboard hardware monitor automatically detects and displays the
CPU, motherboard and power temperatures. Select Disabled if you do not
wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU and chassis fan speeds in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the specific field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU fan control function. When this
field is set to [Enabled], the item CPU Fan Ratio appears.
Configuration options: [Disabled] [Enabled]
Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the Chassis fan control function. When
this field is set to [Enabled], the item Chassis Fan Ratio appears.
Configuration options: [Disabled] [Enabled]