Asus M2V - Manual (Page 115)

5-20 Chapter 5: Software support
5.6 Cool ‘n’ Quiet!™ Technology
The motherboard supports the AMD Cool ‘n’ Quiet!™ Technology that
dynamically and automatically change the CPU speed, voltage, and
amount of power depending on the task the CPU performs.
5.6.1 Enabling Cool ‘n’ Quiet!™ Technology
To enable Cool ‘n’ Quiet!™ Technology:
1. Turn on the system and enter BIOS by pressing the key during
the Power On Self-Tests (POST).
2. In the Advanced > CPU Configuration > AMD CPU Cool & Quiet
Configuration menu, select the item Cool N’Quiet and set it to
Enabled. See section “4.4 Advanced Menu” in the user guide.
3. In the Power menu, select the item ACPI 2.0 Support and set it to
Yes. See section “4.5 Power Menu” in the user guide.
4. Save your changes and exit BIOS Setup.
5. Reboot your computer and set your Power Option Properties
depending on your operating system.
Windows ® 2000/XP
1. From the Windows ® 2000/XP operating system, click the Start button.
Select Settings, then Control Panel.
2. Make sure the Control Panel is
set to Classic View.
3. Double-click the Display icon in
the Control Panel then select the
Screen Saver tab.
4. Click the Power... button. The
following dialog box appears.
5. From the Power schemes
combo list box, select Minimal
Power Management.
6. Click OK to effect settings.
Make sure to install the Cool ‘n’ Quiet!™ driver and application before
using this feature.