Axis Communications 540+ - Manual (Page 82)

Management and Configuration
82 AXIS 540+/AXIS 560
Help The Help page displays a comprehensive description of the
configuration and management activities that can be performed from
the internal Web pages of the Axis Network Print Server. Theses
activities include instructions on how to install the Axis Network
Print Server in various environments and how to upgrade it with new
firmware. A detailed index is also available.
Parameter List Shows all print server parameters and their current settings.
Restart Restarts the print server.
Software Default A Software Default will reset all print server parameters and settings
to their default values
except:
• Node address (NODE_ADDR.)
• IP Address (INT_ADDR.)
• DHCP enabled (DHCP_ENB)
• Installed certificate
• Private key
A Software Default differs from a Factory Default in that the latter is
done by pressing the test button in a specific sequence to
default/clear all print server parameters to default.
See The Test Button, on page 103 for instructions on performing a
Factory Default.
Firmware Upgrade Upgrades the print server’s internal software.