Axis Communications 540+ - Manual (Page 54)

Setting Up - NetWare
54 AXIS 540+/AXIS 560
4. Shutdown Tomcat and the NetWare Enterprise Web Server on the NetWare
file server by executing the following commands:
Type "NSWEBDN"
Type "TOMCAT33 -STOP"
Type "NVXADMDN"
5. Map the next available drive (e.g. G:) to the root of volume SYS on your
NetWare server.
From the temporary directory where
axisIPP-snap-in.zip has been unzipped,
run the batch file AxisIPP.bat (default G:).
If the drive G: is not available, you have to edit the batch file and change the
drive to next available one.
Check that each line in the batch file is executed without failure.
6. Restart Tomcat and the NetWare Enterprise Web Server on the file server by
executing the following commands:
Type "TOMCAT33"
Type "NVXADMUP"
Type "NSWEB"
7. Access the iManager web page on the NetWare server by opening the
following URL:
https://:2200/eMFrame/iManager.html
You have to authenticate.
8. Click on iPrint Management on the left pane and select Create Printer.
9. On the right pane, verify that the newly installed AXIS IPP Gateway
Configuration is under the Gateway type drop-down menu.
If not, it may be necessary to restart the NetWare server.
Now you are ready to use the AXIS IPP Gateway Configuration for installing
iPrint printers. You have to have
Administrator rights to install the printers
through iPrint.