Autostart TWO - WAYLE - Manual (Page 16)

P. 16 User Guide
2 x = Doors intrusion
3 x = Shock Sense
4 x = Hood 5 x = Panic
6 x = Ignition
7 x = Trunk
The alarm diagnostic by LED projects a LED flash sequence immediately after disarming and will
remain in that state of alarm memory until the ignition is turned ON.
Diagnostics – Chirps Table
Chirps Description
1
• Doors locked, alarm and starter kill armed.
• LOCK confirmation.
• Entering mode 1 in the programming centre.
• Disarmed notification
2
• Doors unlocked, alarm and starter kill disarmed.
• Transmitter programmed.
• Entering mode 2 in the programming centre.
3
• LOCK and arm while a zone is left unprotected.
• Entering mode 3 in the programming centre.
• Door zone left unprotected.
4
• UNLOCK and disarm: an intrusion was detected (in warning chirps mode or full chirps
mode).
• Entering tach-programming mode.
• Entering mode 4 in the programming centre.
5 • Siren or horn chirp timing adjustment
Constant
up to 60 sec
• In siren or horn mode: alarm condition generated by an intrusion, by panic mode or when
the system is powered up. The siren will sound for 60 sec.