HighPoint RocketRAID 3522 User Manual
Page 7

Congratulations
7
•
S.M.A.R.T monitoring hard drive status for reliability
•
Staggered Spinup with user selection in BIOS
•
(MAID) spin down drives when array is idle
• SMTP for email notification
• Hardware Monitor function(RocketRAID 3560)
• Alarm / Buzzer alerts for drive failure
• SAF-TE (I2C) support
• SGPIO enclosure management (RocketRAID 3530/3540/3560)
• SNMP for remote management
• Ethernet port for OBM (Out of Band Managment)
• NTP (Network Time Protocol)
• Intelli-VRM. (Intelligent Virtual RAID Managment)
• SHI – Storage Health Inspector (S.M.A.R.T. and disk maintenance)
RAID Management
• TerabyteSaver™ and TerabyteGuard™ for Data Protection and Reliability
• Firmware update in the Operating System
• Hot key (ctrl-h) boot-up RAID manager via BIOS
• API library for customizing AP
• Command Line Interface (CLI)
• Web browser-base RAID management software
• Disk scrubbing to prevent degraded RAID arrays
• Bad sector repair and re-mapping to reduce dropped drives
• ATA pass-through mode support
Operating System Support
• Windows XP, 2003, Vista, 2008 (32 and 64-bit versions)
• Linux
• FreeBSD
• Mac OS X 10.4.x & 10.5.x
• GPL licensed driver into Linux Kernel 2.6.25
Array Monitors, Alerts and Indicators