HighPoint RocketRAID 3522 - Manual (Page 17)

Hardware – Description and Installation
2.1 – Installing the RocketRAID 35xx Host Adapter
17
2 – Installing the RocketRAID Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 35xx
host adapter.
1. Open the system chassis and locate an unused PCI-E x8.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID 35xx into the PCI-E slot, and secure the bracket to
the system chassis.
4. After installing the adapter, attach the Mini-SAS connectors to the RocketRAID
35xx’s Mini-SAS port,and to chassis backplane. Each Mini-SAS cable supports
up to 4 hard disk drives. Consult the chassis’s manual for proper installation
procedures.
5. Close and secure the system chassis.
(illustration shows RocketRAID 3560)