HighPoint RocketRAID 2720C2 - Manual (Page 9)

9
Note: the Array Name command is optional – it is not necessary to name the array. The array
can be named at a later time, and the name of the array can be changed at any time.
3.
On the Create menu, use the arrow keys to highlight the Select Devices item and press the
Enter key. A device list will appear, and display all available disks.
4 . Highlight the target disks that you want to use, and press the Enter key to select them. A
numeral will be displayed before each selected disk. This number designates disk order. After
all of the disks have been selected, press the ESC key to return to the Create Menu.
5 .
Next, Use the ↓ arrow key to highlight the Capacity (GB) option and press the Enter key. The
total available capacity will be displayed. Press the Enter key if you wish to use all available
space. If you wish to reserve disk space for additional arrays/single disks, use the keyboard to
input the amount of space (in GB) you wish to set aside for this particular array, and press the
Enter key.