HighPoint RocketRAID 2720C2 - Manual (Page 3)

3
HighPoint RocketRAID 2720C2 -Cross-Sync RAID Solution
HighPoint’s 6Gb/s Cross-Sync RAID Solution aims to revolutionize DAS applications. Cross-Sync
synchronizes up to two RocketRAID 2720C2 controller cards to work as a single RAID storage
unit. The Cross-Sync RAID Solution provides 16 SAS/SATA6Gb/s Ports over a Dual PCIe x8
Host Interface, and is capable of delivering up to 4GB/s of transfer performance!
Key Features:

Up to 4GB/s Transfer Performance!

Enables arrays to be created using up to 2x RAID 2720C2 HBA's

16x SAS/SATA 6Gb/s Ports across Dual PCIe 2.0 x8 Transfer Bandwidth
1. Kit Contents

RocketRAID 2720C2 x2

Low profile bracket x2

Quick Installation Guide
2. Installing the RocketRAID 2720C2 Host Adapters
Note: Make sure the system is powered-off before installing the RocketRAID host adapters.
1) Open the system chassis and locate two unused PCI-Express (2.0 or 1.0) x8 slots.
2) Remove the PCI slot cover.
3) Gently insert the RocketRAID host adapters into the PCI-Express slots, and secure the
brackets to the system chassis.
4) After installing the each adapter, attach the hard disks or disk enclosure to the RocketRAID
card using the SAS or SATA cables.
5) Close and secure the system chassis.