Vaisala RS92-D - Manual (Page 24)

User's Guide ______________________________________________________________________
22 __________________________________________________________________ M210987EN-C
3. Remove the radiosonde from the package, straighten the antenna,
and take the unwinder out of the package.
1002-102 Figure 12 Placing the Antenna Into Flight Position
4. Remove the small plastic rubber wire from the unwinder.
0601-048 Figure 13 Unwinder Details
5. Make sure the plastic lip under which the string runs is level with
the unwinder bottom plate. If the lip is bent, bend it gently back to
level the position.
Proceed to prepare the sounding.
1 = Rubber wire
2 = Unwinder lip