Radar reflector, Non-totex parachute, Radar reflector non-totex parachute – Vaisala RS92-D User Manual
Page 21
Chapter 3 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 19
for details. For unwinder attaching instructions,
see section
.
Radar Reflector
Attach the unwinder to the radar reflector with a rubber plate accessory
(Vaisala code RS46158). The rubber plate accessory lets the unwinder
swing properly, making sure that the suspension string is unwound
smoothly.
1.
Tie the radar reflector to the balloon with a string of approximately
50 cm in length.
2.
Attach the rubber plate (RS46158) to the radar reflector.
for details. For unwinder attaching instructions,
see section
.
Non-Totex Parachute
If you are using a parachute that has no firm objects to prevent the
unwinder from twisting, you have to use a hanger board (Vaisala code
RS46157).
1.
Tie the parachute to the balloon with a string.
2.
Tie the hanger board to the parachute with a string of
approximately 20 cm in length.
for details. For unwinder attaching instructions,
see section