Other functions, Setting the alarm levels, Figure 15 – Vaisala MM70 User Manual
Page 34: Measurement setting menus, Figure 16, Alarm function menus, Other functions setting the alarm levels
USER'S GUIDE____________________________________________________________________
7.
Select the B value (B:0.0000) and press the SET key.
8.
Set the value B by using the arrow keys up/down/left/right, press
the OK key.
9.
You may key in coefficients for 4 different oils. Identify the oil
by numbering them (1...4). Select the first row (H
2
O
oil
) and set
the identification number. Then feed the coefficients as shown
above.
10. Press
the
EXIT key to return to the basic display.
11. Remember always select the correct oil type before
measurements.
0605-109
Figure 15
Measurement Setting Menus
NOTE
If you want to determine coefficients for oil, see Determination of
Oil-specific Coefficients on page 55.
Other Functions
Setting the Alarm Levels
0605-092
Figure 16
Alarm Function Menus
32 __________________________________________________________________ M210498EN-C