External amplifiers, English xlr balanced line outputs – av888 only, Analogue pre-amplifier outputs – Arcam AVR Surround Amplifer AV888 User Manual
Page 49: E-47
E-47
English
XLR balanced line outputs –
aV888 only
The AV888 processor provides XLR connectors for each
of seven channels, to an XLR-equipped amplifier (e.g.
the Arcam P777). Three XLR subwoofer outputs are
provided in addition.
RIGHT, LEFT, CENTRE
Connect these to the equivalent (Right, Left and Centre)
front channels of your power amplifier.
SW1
Main subwoofer output. Connect this to the input of
your active subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer 3 auxiliary outputs. These
are equivalent to SW1 but they allow the use of multiple
subwoofers.
SR, SL
Surround Right and Surround Left outputs. Connect
these to the Surround Right and Left power amplifier
inputs.
SBR, SBL
Surround Back Right and Surround Back Left outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Left power amplifier inputs.
For 6.1 channel speaker configurations, connect the
single Surround Back power amplifier to the SBL output.
external
amplifiers
analogue pre-amplifier outputs
All pre-amplifier analogue outputs are buffered, have
a low output impedance and are at line level. They are
able to drive long cables or several inputs in parallel if
required.
R, L, C
Connect these to the equivalent
(Right, Left and Centre) front
channels of your power amplifier.
SW1
Main subwoofer output. Connect
this to the input of your active
subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer
3 auxiliary outputs. These are
equivalent to SW1 but they allow
the use of multiple subwoofers.
SR, SL
Surround Right and Surround Left outputs. Connect
these to the Surround Right and Left power amplifier
inputs.
SBR, SBL
Surround Back Right and Surround Back Left outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Left power amplifier inputs.
For 6.1 channel speaker configurations, connect the
single Surround Back power amplifier to the SBL output.
��
��
�
�
���
���
��
���
��
�
���
���
�
�
�
���
��
���
�����
�
��
�
����
������
���
���
��
�����
���
���
���
��
������������������������
�����