beautypg.com

Remote control, The cr102 universal remote controller – Arcam AVR Surround Amplifer AV888 User Manual

Page 25

background image

E-23

English

Inserting batteries into the

remote control

1. Open the battery compartment by pressing the

button on the back of the handset.

2. Insert four ‘AAA’ batteries into the battery

compartment – two facing the top of the unit,

and two facing the end, as in the diagram.

3. Lower the end cap onto the plastic locating plate

in the handset. This acts as a hinge, and you

can now push the end cap firmly into its locked

position with a click.

The CR102 universal remote

controller

The CR102 is a sophisticated ‘universal’ backlit remote

control that can control up to eight devices. It is pre-

programmed for use with the AVR600, AV888 and

many other Arcam products (FM/DAB tuners, CD

players and DVD players).
With its extensive built-in library of codes, it can also

be used with thousands of third party audio-visual

components – TVs, satellite and set-top boxes, PVRs,

CD players, etc. See the list of codes at the back of this

handbook, beginning on page 58.
The CR102 is a ‘learning’ remote, so you can teach it

almost any function from an old single-device remote.

You can also program the CR102 to issue a sequence of

commands (‘macros’) from a single button press.

remote

control

Using the remote control

Please keep in mind the following when using the

remote control:

<

Ensure there are no obstacles between the

remote control and the remote sensor on the

front panel. The remote has a range of about 7

metres. (If the remote sensor is obscured, the Z1

IR remote control input jack on the rear panel is

available. Please consult your dealer for further

information.)

<

Remote operation may become unreliable if

strong sunlight or fluorescent light is shining on

the remote sensor of the unit.

<

Replace the batteries when you notice a

reduction in the operating range of the remote

control.

notes on batteries:

<

Incorrect use of batteries can result in hazards such

as leakage and bursting.

<

Do not mix old and new batteries together.

<

Do not use non-identical batteries together –

although they may look similar, different batteries

may have different voltages.

<

Ensure the plus (+) and minus (-) ends of each

battery match the indications in the battery

compartment.

<

Remove batteries from equipment that is not going

to be used for a month or more.

<

When disposing of used batteries, please comply

with governmental or local regulations that apply in

your country or area.

���

����

�����

����

���

���

��

����� ���

�����

���

���

���

��

���

���

���

���

��

��

�����

����

����

����

������

������

��

����

���

����

����

������

����

����

����

����

����

����

�����

�����

�����

��

This manual is related to the following products: