Haws 2500.FS - Manual (Page 4)

6/13 Model 2500.FS Page 4 of 12
Step 2: Remove the cup dispenser from
the front of the unit by
unscrewing the single Phillips
screw found in the back and just
inside the lip of the dispenser.
Lift the dispenser up, then out.
Step 3:
Using the supplied screw, nut, and washer (Phillips screwdriver and adjustable wrench
required), attach the supplied filter mounting clip to the condenser as shown, such that the
mounting screw is approximately 18” above the floor.