Sandvik Coromant Silent tools - users guide - Manual (Page 29)

29
7. Tips and hints
General
• If the oil in the dampened bar has
become too viscose due to long
storage or tranportation in low
temperatures, knock gently on the
bar with a rubber hammer.
• For best performance, clean all
male and female parts and
lubricate with oil at least once a
year.
Lubricant should also be applied to
the screws when needed.
• Replace worn or exhausted screws
and washers.
• Dampened bars can become
deformed due to the thin wall
thickness. When assembling,
ensure that the bars are held
correctly.
• Always check the clamping when
working with Silent Tools products.
• Use a torque wrench to get correct
screw-tightening.