Pure Highway - Manual (Page 7)

5
EN
1. Highway may automatically switch on when you connect the power cable to
your vehicle’s external power socket. If nothing happens make sure that there
is power available from the external power socket and press the
[Tune] button
to switch the unit on.
2. Wait for Highway to perform an autotune for all available DAB stations, which
takes about a minute. The number of stations found is displayed.
3. Wait for Highway to search for a free FM frequency for transmitting DAB audio.
(If you have connected Highway to your car stereo’s line in input the FM scan
does not occur. Go to step 5.)
4. The screen shows the optimal free FM transmission frequency. Tune your car
radio to the FM frequency shown to hear the DAB station, e.g., 88.1MHz. If
your car radio has RDS enabled you will see ‘PURE DAB’ on the car radio’s
display.
5. After 30 seconds the DAB station screen appears, or you can rotate the [Tune]
dial or press any button to see it sooner.
Tuning in
PURE Highway 00
PURE Highway 28
Searching... >
87.70MHz
radio to 88.1FM
Tune your car
1
04-02-2008
Classic FM