Pure Evoke-2 - Manual (Page 16)

13
Resetting your EVOKE-2
A reset option is provided to enable you to reset your unit. This removes all presets, stored stations and favourite station
settings and resets all options to defaults. Performing an autotune process will solve most DAB problems but you may
want to use this option if you move house or want to restore default values to options you have changed.
To select the reset option:
1. Press and hold the Setup button for more than two seconds. The display will show ‘Press Tune to confirm reset’
2. Press the Tune button to confirm the reset or press no buttons for around seven seconds to cancel the reset.
Note When the unit is reset it returns to the DAB mode by default.