Pure Evoke-2XT - User Guide - Manual (Page 12)

9
Using FM
To listen to FM radio stations press the DAB/FM/AUX button until you see the FM icon on screen.
If this is the first time you have switched to FM, EVOKE-2 XT starts at the beginning of the
frequency range, otherwise you hear the last station you were listening to.
Changing stations
You can change stations using the Tune knob or by selecting a numbered preset button.
Turn the Tune knob and let go to search up or down the frequency range and find the station
you want. You may see ‘Searching...’ briefly on screen while the search for the next station is
in progress.
You can change the FM tuning method, if preferred, to enable you to manually step up and
down the frequency range see Tuning method on page 10.
Using presets
The numbered buttons enable you to assign up to six FM radio stations to presets for easy
one-touch access. These six presets are in addition to any DAB presets you may have stored
and are only accessible while in FM mode.
To store presets press and hold down a numbered button to store the station under that
number. This will overwrite any existing FM preset stored under this number.
To select a preset press the relevant numbered button.
87.50MHz FM
Default FM screen
Searching... > .
Seek tune - Searching for station
Preset 1 saved
98.20MHz FM
Storing a preset