Pure Evoke-2XT - User Guide - Manual (Page 11)

8
Turn the Tune knob to scroll through the following options and push to choose one:
DRC Off
DRC is switched off. Any DRC level broadcast will be ignored.
DRC Half DRC level is set to half that sent with the broadcast.
DRC Full Applies the DRC level as sent with the broadcast.
Autotune UK
Scans all UK frequencies for DAB stations and adds any new ones to the station list.
Autotune full
Scans the full range of digital frequencies in Band III. This option is for use outside the UK
where other Band III stations may be available.
Tuning aid
Shows signal level which you can use to find the best position for your radio and aerial.
1. Turn the Tune knob to scroll through different channels and push to choose one (UK
stations are in the range 11B to 12D). You see a signal level display.
The empty block indicates the minimum required level for reception and the filled blocks
indicate the current level.
2. Move your aerial while watching the display and to try to raise the current level to the
empty block or beyond. Once you have a good signal the display will show the multiplex
name and add the stations to the station list.
3. Push the Menu button to exit the tuning aid or use the Tune knob to change station.
Note You can display the signal level at any time by pushing the Tune knob.
Autotune... 12
Autotune UK Band III option
12B 225.64MHz
Tuning aid - channel
12B 225.64MHz
Tuning aid - low signal
12B BBC DAB
Tuning aid - good signal