Pure BUG - Manual (Page 19)

19
Active station Displays active stations at the top of the station list and
inactive ones at the bottom, in alphanumeric order. Inactive
stations are those on your station list but not currently
available, marked with a ’?’.
Multiplex Lists stations in groups according to their multiplex.
Multiplexes are groups of stations owned and broadcast by a
multiplex operator.
Remove inactive stations Removes inactive stations from the station list.
Add favs to presets Available only when Favourite station order (above) has been
selected. Transfers your ten favourite stations to presets.
Manual tune
Find new stations or fine tune your reception using this option.
You see a list of channels and frequencies. Each multiplex has a different channel and
frequency (e.g. BBC is channel 12B and Digital One is 11D), contact the radio stations
for information on which multiplex they are broadcast on.
1. Select the channel you want from the list.
Note You see a signal strength display. The marker indicates the minimum required
level for reception and the filled blocks indicate the current level.
2. Move your Bug or aerial and to try to raise the current level to the marker or beyond.
You will see the multiplex name next to the channel if a good signal is received and
the stations in that multiplex will be added to the station list. Press the navigation
button to see a list of the new stations added.
Note You can show the signal strength for a station you are listening to at any time by
pushing the navigation button.
Channel/frequency selection
Below marker - no reception
Above marker - reception available