Changing what’s shown on screen – Pure BUG User Manual
Page 15

15
Changing what’s shown on screen
Show and Tell time.
The Bug has 5 DAB info modes so you can change what you see on
screen. Press the Info button and repeat to choose between the 5 info modes. Some
of the modes have more than one option, shown by an arrow at the bottom right of the
screen. Push the shortcut button next to the arrow to choose between the options for
that mode (shown below with arrows).
1 Scrolling
text Scrolling text broadcast by some stations.
2
Multiplex Name of the multiplex the current station belongs to.
Multiplexes are groups of stations broadcast by a single operator.
Date Day and date broadcast by the multiplex.
Channel DAB channel and frequency of the station you are listening to.
Mode Stereo or Mono indicator and data rate at which the station is
being transmitted. This rate is set by the stations to suit the type
of material being transmitted. High rates generally mean higher
quality.
Quality Signal quality for the station you are tuned to. As a guide, values
from 85 to 100 indicate good reception, 70 to 84 so-so reception and
0 to 69 poor reception.
Content Description of the content broadcast by the station.
3 Clock
Full screen clock showing hours and minutes.
Clock 2 Full screen clock showing hours, minutes and seconds.
Clock 3 Date and time.
4 Presets
1-5 DAB presets 1-5 for quick access using the six shortcut buttons.
6-10 DAB presets 6-10 for quick access using the six shortcut buttons.
5 Bug
eyes Animated bug eyes, just for fun.
Scrolling text
Multiplex
Clock
Presets
Bug eyes