Pure Chronos iDock - Manual (Page 12)

10
Using the sleep timer
The sleep timer switches your radio into standby after a number of minutes.
To set/change the sleep timer
Press the Sleep button and repeat to increase the duration of the Sleep timer (90
minutes maximum). Wait a few seconds and the Sleep timer will activate.
To cancel the sleep timer
Press and hold the Sleep button for 3 seconds.
;TMMX
BTcb[TT_
"\X]b
BTcb[TT_
$\X]b ;TMMX
BTcb[TT_
>UU
;TMMX
?[P]TcA^RZ
^WT\XP]AWP_b^Sh
Changing your radio setup
DAB only options
Station Order
Alphanumeric Lists all stations in alphanumeric order.
Active station Lists active stations first on the station list.
Multiplex Lists stations in groups according to their Multiplex.
Trim stations Removes inactive stations from the station list.
Autotune
Scans all DAB Band III frequencies for stations and adds any new stations found to the station
list.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to
hear at low volume or in a noisy environment. Check with the broadcasters to find out if they
use DRC.
DRC full Applies the DRC level as sent with the broadcast.
DRC half DRC level is set to half that sent with the broadcast.
DRC off Any DRC level broadcast will be ignored.
5MV]