Pure Chronos iDock - Manual (Page 10)

8
Setting alarms
Chronos iDock has 4 alarms. When activated, an alarm either switches the radio on (if in standby)
and tunes to a DAB or FM radio station; activates and plays your iPod (if docked); or sounds a
beeping alarm tone.
How to set an alarm
1. Press the Alarm button then select Alarm 1, 2, 3 or 4 with +/− and Select. The time,
repeat days and on/off status are displayed on the top line.
2. Select ‘Set alarm’ and choose ‘On’ to turn the alarm on.
3. Select ‘Set time’ to set the time you want the alarm to sound. Adjust the hours using +/−
and press Select to confirm, then adjust the minutes and press Select to confirm.
4. Select ‘Set days’. Choose when you want the alarm to repeat (press +/− to browse
through the options and press Select to confirm):
Daily Every day
Weekday Monday to Friday, every week
Weekend Every weekend
Saturday Every Saturday
Sunday Every Sunday
Once The alarm will sound at the time you have selected and not repeat
5. Select ‘Set Mode’ to choose the type of alarm you want: Radio, Tone or iPod.
6. If you select ‘Radio’, now choose a radio station from the preset list using +/− to choose and
Select to confirm. If you select ‘Last used’ the alarm will tune to the DAB or FM station you
most recently listened to. (To learn how to set presets, see page 6.)
)TIZU
&)3PX[h>UU
0[Pa\
;MTMK\
>UU
>]
&)"
&)"BTc\X]b Œ
;MTMK\
;MTMK\
An alarm you’ve already set can be turned off by selecting ‘Set Alarm >
Off’. You can reactivate an alarm by selecting ‘On’.
Tip