Remote control function descriptions – Audiovox Jensen JE17FDTV User Manual
Page 8
*
Function control is available on the unit and the remote control.
** Not used in this model
*** Function control only available in TV mode.
1. POWER Button*
Press this button to turn the unit on. Press the button again to turn the unit off.
2. SOURCE Button*
Each time the button is pressed, the audio / video source will change: DVD, AUX / GAME (Optional), AV1 and TV.
3. AUTO MEMORY Button (AUTO PROGRAM Button)***
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels
are automatically stored.
4. SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed
into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.
5. ERASE / WRITE Button***
While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed
in “GREEN” and the erased channel numbers are displayed in “RED”.
6. Channel Up () Button
Use this button to increase the channel number*** to the desired channel and to scroll upward in menu options.
7. MUTE Button
Press this button to mute the audio.
Pressing the button again restores the sound to the previously set level.
REMOTE CONTROL FUNCTION DESCRIPTIONS
8