Audiovox Jensen JE17FDTV - Manual (Page 18)

Setup Menu
The SETUP menu allows you to choose the signal type (ANTENNA INPUT) attached to your TV,
build your TV’s channel list, and edit the channels within the list.
NOTE: Before editing a channel, use the number buttons to enter the channel number that
you want to edit before entering the menu system.
To access the SETUP menu:
1. Press MENU (the TV Main menu appears).
2. Press the down arrow button to highlight SETUP, and press ENTER.
3. Press the up and down arrow buttons to highlight an item, and then press ENTER to select it.
• WRITE (Channel) – Adds the current channel to the channel list (the channel is added to the
channel list and appears in the upper right corner). Remember to use the number buttons to
access the channel before entering the menu system.
• ERASE (Channel) – Deletes the current channel from the channel list (the channel is deleted
from the channel list and appears in the upper right corner). Remember to use the number
buttons to access the channel before entering the menu system.
• AUTO CH. SEARCH – Searches for channels the signal is receiving and stores them in the
TV’s channel list.
• ANTENNA INPUT – Selects the signal source your TV is receiving AIR or CATV (STD,
HRC, IRC).
MAIN MENU
CLOSED CAPTION
PICTURE
ZOOM MODE
PARENTAL CONTROL
SETUP
SETUP
WRITE
ERASE
AUTO CH. SEARCH
ANTENNA INPUT
ENTER
18