Outback Power Systems FLEXware 250 - Users Guide User Manual

Page 10

Remove these
screws to install
the FLEXware 250
on the AC side of
the FX (unthreaded
standoffs insert
into screw holes).

Remove these
screws to install
the FLEXware 250
on the DC side of
the FX (unthreaded
standoffs insert into
screw holes).

Figure 6: FLEXware 250 AC and DC chassis mounting locations

AC side

screw holes

DC side
screw holes

Figure 7:

Side view of FLEXware 250 fitting onto AC side of an FX Series Inverter/Charger

Unthreaded standoff

Screw hole