Outback Power Systems GVFX Series Inverter/Charger Programing Manual - Manual (Page 18)

auXILIary (auX) FunCtIOnS
The AUX output provides a 12 VDC, 0.7 ADC max output at the AUX terminals to control either DC or
AC external loads. Typical loads include sending a fault alarm signal or running a small fan to cool the
FX.
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
• Press the soft key.
Note: Pressing and holding the first two soft keys at the
same time will always bring up the Main Menu screen.
• Push any soft key on the ADV/SETTINGS/WARNING
screen and go to the ADV/PASSWORD screen.
17